Features
With an emphasis on enhanced security and safety, the recovering infrastructure in Libya presents a unique opportunity for innovative equipment suppliers
DURING the Arab Spring uprisings much of Libya was devastated. Oil and gas infrastructure including tanks and pipelines became easy targets and many were destroyed.
Fast forward 10 years and the region is slowly being re-built. Oil production…
Read More »
Read More »
A unique oceanfront greenfield site is up for sale in the State of Sonora on the west coast of Mexico. The development site consists of 1,297 hectares (3205 acres) of undeveloped land which has direct access to the Sea of Cortez
THE SITE benefits from a substantial amount of existing infrastructure, including large quantities of economical electrical power and natural gas already in…
Read More »
Read More »
What it takes to implement corrosion prediction of tank bottoms.
IN PART 1, we established a foundation for determining what a corrosion rate is, how care is required in defining a corrosion rate, and how it is used to establish tank internal inspection intervals. In Part 2, we provided the methodology for using survival analysis to properly quantify the useful tank bottom life. Part 3 will look…
Read More »
Read More »
A look at the points raised by Ollie Folayan in Tank Storage Magazine’s October webinar
DIVERSITY and inclusion are buzzwords that seem to be everywhere at the moment. But in a world where differences, at least by many people, are now being celebrated, is the tank storage sector doing enough to encourage people of colour, or women, or people with disabilities, or members of the LGBTQ+…
Read More »
Read More »
Tank Storage Magazine talked to Implico CEO Tim Hoffmeister about ongoing structural reorganisations within the oil and gas industry, the need for a standardised supply chain and the upcoming online check-in for trucks at tank farms.
DIGITALISATION is still on everyone’s lips. What is your understanding of the term ‘digitalisation of the tank storage industry’?
Terminal…
Read More »
Read More »
AP Sensing’s novel solution addresses the need for monitoring storage tanksand pipelines
THE susceptibility of modern-day assets in the oil and gas industry canpose significant challenges. For example, storage tanks are filled with chemicals that are flammable and often explosive, but these tanks can be ten or more years old and geographically located in regions with substantial lightning…
Read More »
Read More »
Hytrans looks at how to choose the right hose, couplings and recovery unit for your needs
INDUSTRIAL firefighting asks for more water and more pressure, and this needs larger hoses and larger pumps. The mobile water supply systems need to be more flexible and more powerful to provide this flow and pressure. However, while flow and pressure are important, they are not the only things that make…
Read More »
Read More »
Lightning strikes are always a risk on a storage tank, but effective bonding between the floating roof and the shell can reduce the risk of sparks
SINCE 2013, at the Iranian Oil Terminal facility located in Kharg Island, more than 12 fire incidents have occurred due to lightning strikes. In 2015, one strike resulted in simultaneous fires in five tanks, and staff noticed that all damaged tanks…
Read More »
Read More »
Protecting your tanks from lightning strikes using a retractable grounding reel
THE roof of an external floating roof tank rests directly on the surface of the stored liquid, leaving little vapour space and consequently leading to a much lower risk of rim space fire. Proper lightning protection is critical for fire prevention –the floating roof tank roof and the outer shell must be bonded…
Read More »
Read More »
Bill Atkinson from Adler and Allan discusses key environmental considerations for fires, and how to rebuild a compliant business once the smoke has cleared
MAJOR accidents such as the 2005 Buncefield oil storage depot fire prove that industrial blazes can swiftly escalate into catastrophic pollution events. As witnessed during the disaster in Hemel Hempstead in the UK – which released a…
Read More »
Read More »
Safety expert Paul Calderwood runs through the aspects to consider when developing an emergency management plan
ONE of the benefits of having worked in emergency management planning for so long, is that I have seen a lot of incidents and read the reports about what happened and how it happened. As a deputy fire chief I responded to many incidents and have seen firsthand how fast things can go…
Read More »
Read More »
Standing ankle deep in spilled Sauvignon Blanc inspired structural engineer Will Lomax to develop the Onguard system to protect all liquid storage tanks from earthquakes
BETWEEN 2011 and 2016, New Zealand was struck by a series of devasting earthquakes. Will Lomax is a structural engineer who witnessed and experienced the three most severe events first-hand, and who was directly involved in…
Read More »
Read More »
New-generation perimeter intrusion detection sensors combined with video analytics and intelligent lighting can dramatically enhance detection, deterrence and response capabilities while meeting budgetary constraints and operational realities
THE PHYSICAL security of storage facilities for oil, natural gas, and refined products is critical for public safety. A deliberate attack on a facility…
Read More »
Read More »
Navigator Terminals turned to drones for safe, reliable tank inspections
MORE than ever before, drones are becoming invaluable tools in a variety of sectors – including the tank storage world. With their ability to increase efficiency and improve safety, drones have become important tools for inspection, enhancing condition monitoring.
Until recent years drones were only able to…
Read More »
Read More »
How computational fluid dynamics helped in the development of innovative jet
mixers for tanks
NOT MANY people understand that the oil used to fry chips meets many challenges on its route from the field to the frying pan. Some of them arise during the liquid bulk storage phase, such as layering of the oil and building of sediments in the shore tank due to inefficient mixing. This, in turn,…
Read More »
Read More »
Spill control manufacturer HalenHardy charts the changes and developments that ultimately led to its new recycled sorbent
ANCIENT Greek and Roman texts and artwork document the use of terracotta, metal and wooden containers to transport and store liquids – and with the storage of liquids came the potential for anything holding those liquids to leak and spill. The same ancient texts and…
Read More »
Read More »
Find out the benefits of risk-based inspection for API RP 581 and EEMUA 159
CHALLENGING times strongly drive the need to optimise existing procedures and systems while minimising business risks with day-to-day operations. When talking about tank integrity management, we deal with the challenge of balancing efforts and benefits while complying with safety regulations and standards requirements,…
Read More »
Read More »
The 2020 Tank Storage Magazine Environmental Performance Award winner looks back
IN THE midst of the pandemic we are all living through, advanced environmental technology solutions company Tecam is celebrating 15 years in business.
In August 2005 Borja Maestro founded Tecam Soluciones Medioambientales in Barcelona, Spain, as an environmental technology distribution company. That small…
Read More »
Read More »
Michele Nazzaro and Harold Kempinga from Aereon Europe discuss the Aereon CEB, the EU-certified best available technology for gas flaring operations
MANAGING vapour recovery and the containment of volatile organic compound (VOC) emissions is a must. Not only are atmospheric emissions regulated by increasingly stringent legislation, but many companies have a growing culture and commitment for a…
Read More »
Read More »
VPS single-flow twin screw pumps can adapt to a variety of flow media with low
operating costs
A TECHNOLOGICAL change is emerging in tank farm and chemical applications. Single-flow twin screw pumps have started to replace conventional positive displacement pump technologies at flow rates up to 500 m3 per hour.
This is as a result of an increasing demand in flexibility, the permanent…
Read More »
Read More »








